CCNP Data Center Certification 350-601 Sample Questions Reliable

Prepare for the Actual CCNP Data Center 350-601 Exam Practice Materials Collection

Introduction to Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Exam

This 350-601 exam test helps you prepare for the Cisco CCNP Data Center and CCIE Data Center certifications for advanced-level data center roles. In this course, you will master the skills and technologies you need to implement data center compute, LAN, and SAN infrastructure. You will also learn the essentials of automation and security in data centers. You will gain hands-on experience deploying, securing, operating, and maintaining Cisco data center infrastructure including Cisco MDS Switches and Cisco Nexus Switches; Cisco Unified Computing System (Cisco UCS) B-Series Blade Servers, and Cisco UCS C-Series Rack Servers.

Career Path

You can take the Cisco 350-601 exam to qualify for as many as three certificates as mentioned above. So, the next path will depend on your goals. If you are at the intermediate level, the best certificate to opt for is Cisco CCNP Data Center. But if you take this exam to attain the CCIE Data Center accreditation, you may want to seek a new challenge by focusing on a completely different path since it has a lab exam.

 

NEW QUESTION # 125
Refer to the exhibit.

What is the result of implementing this configuration?

• A. The Fibre Channel interface is configured for synchronization distribution.
• B. The Fibre Channel interface is configured for FSPF.
• C. The Fibre Channel interface is configured for SPAN.
• D. The Fibre Channel interface is configuration for source distribution.

Answer: C

NEW QUESTION # 126
Refer to the exhibit.

What is a characteristic of the UUID in the service profile presented.

• A. unique system generated
• B. based on the hardware
• C. allocated from a UUID pool
• D. vendor assigned

Answer: D

Explanation:
Explanation

NEW QUESTION # 127
When a strict CoPP policy is implemented, which statement describes an event during which packets are dropped?

• A. Fifteen SSH sessions remain connected to the switch.
• B. A web server that is connected to a switch is affected by a DDoS attack.
• C. A large system image is copied to a switch by using the default VRF.
• D. A ping sweep is performed on a network that is connected through a switch.

Answer: B

Explanation:
Section: Security

NEW QUESTION # 128
The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.
Which two SPAN characteristics must be considered? (Choose two.)

• A. A SPAN source port cannot be a destination SPAN port.
• B. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
• C. SPAN source ports can be monitored in multiple SPAN sessions.
• D. The rx/tx option is available for VLAN or VSAN SPAN sessions.
• E. Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.

Answer: A,B

Explanation:
Section: Network
Explanation/Reference:

NEW QUESTION # 129
An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the upstream vPC switch peers. Which vPC feature must be implement to ensure that vPC and non-vPC switches receive same STP bridge ID from the upstream vPC switch peers?

• A. Peer-gateway
• B. VPC local role-priority 4000
• C. System-mac 0123.4567.89ab
• D. Peer-switch

Answer: D

Explanation:
Peer-Switch feature allows the vPC peers use the same STP root ID as well as the same bridge ID.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html

NEW QUESTION # 130
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
* vNIC and vHBA profiles
* Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)

• A. facility-manager
• B. server-profile
• C. server-compute
• D. server-equipment
• E. operations

Answer: C,D

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html

NEW QUESTION # 131
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generable a massage. What configuration will accomplish this task?

• A. Option B
• B. Option C
• C. Option A
• D. Option D

Answer: B

Explanation:
Explanation
The following example modifies an overridden policy by changing the number of FCNS database entries to
1500. It also generates both the configured and the default syslog messages of the default system policy event manager applet fcns_policy override __fcns_entries_max_per_switch event fcns entries max-per-switch 1500 action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit.

NEW QUESTION # 132
Which three firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose three.)

• A. board controller
• B. BIOS
• C. adapter
• D. third-party
• E. system
• F. CIMC

Answer: A,B,F

NEW QUESTION # 133
Refer to the exhibit.

Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?

• A. IPv4 multicast address
• B. IPv4 unicast address
• C. IPv4 gateway address
• D. IPv4 anycast address

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/FabricManager/cfs.pdf

NEW QUESTION # 134
Refer to the exhibit.

Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used

Answer:

Explanation:

Explanation

Table Description automatically generated

NEW QUESTION # 135
Refer to the exhibit.

Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

• A. Option B
• B. Option D
• C. Option C
• D. Option A

Answer: B

Explanation:
NXs1# guestshell
[admin@guestshell ~]$ for x in {1..5}; do dohost "conf t ; interface eth1/$x ; description Server$x" ; done Enter configuration commands, one per line. End with CNTL/Z.
Enter configuration commands, one per line. End with CNTL/Z.
Enter configuration commands, one per line. End with CNTL/Z.
Enter configuration commands, one per line. End with CNTL/Z.
Enter configuration commands, one per line. End with CNTL/Z.
[admin@guestshell ~]$

NEW QUESTION # 136
An engineer is performing an ISSU upgrade on the Cisco MDS 9000 Series Switch. What is the impact on the control plane of the switch?

• A. It is down for less than 80 seconds.
• B. It remains down until the next reboot.
• C. It remains up throughout the update.
• D. It remains down for more than 80 seconds but less than 140 seconds.

Answer: C

NEW QUESTION # 137
Refer to the exhibit.

Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used

Answer:

Explanation:

NEW QUESTION # 138

Refer to the exhibit. Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?

• A. IPv4 multicast address
• B. IPv4 unicast address
• C. IPv4 gateway address
• D. IPv4 anycast address

Answer: A

Explanation:
Section: Network
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/ FabricManager/cfs.pdf

NEW QUESTION # 139
Refer to the exhibit.

A network engineer is using tcpdump to capture a snapshot of OSPF-related traffic on a specific Cisco NX-OS switch port. For security reasons, the capture must be taken using an embedded container that is already deployed on the Cisco Nexus device. Which command completes the script?

• A. guestshell
• B. run bash
• C. run guestshell
• D. guestshell-bash

Answer: A

NEW QUESTION # 140
An engineer must use the Embedded Event Manager to monitor events that occur on a cisco Nexus 9000 series switch. An environment variable needs to be created so that several policies use the monitored events in in their actions. The external email server is represented by IP address 10.10.10.10. which command sets the environment variable?

• A. N9k2(config)# event manager policy environment mallserver ''10.10.10.10''
• B. N9k2 (config)# event manager environment mallserver ''10.10.10.10''
• C. N9k2# event manager environment mallserver ''10.10.10.10''
• D. N9k2 (config-apple1)# environment mallserver ''10.10.10.10''

Answer: B

Explanation:
To set an Embedded Event Manager (EEM) environment variable, use the event manager environment command in global configuration mode. To disable an EEM environment variable, use the no form of this command. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/command/eem-cr-book/eem-cr-e1.html

NEW QUESTION # 141
Refer to the exhibit.

Which action must be taken before the maintenance policy can be committed?

• A. Specify a maintenance time by selecting a schedule.
• B. Associate a service profile to the maintenance policy.
• C. Set the soft shutdown timer to a specific time.
• D. Set the policy to apply the change on the next reboot.

Answer: A

NEW QUESTION # 142
......

Ace Cisco 350-601 Certification with Actual Questions Jan 09, 2024 Updated: https://prepaway.dumptorrent.com/350-601-braindumps-torrent.html